 |
12V DC-DC LiFePO4 Lithium-ion Battery RV Charging Controller
उत्पाद विवरण:
| उत्पत्ति के प्लेस: | शेन्ज़ेन |
| ब्रांड नाम: | Oxiang /OEM |
| प्रमाणन: | CE.RoHS,FCC |
| मॉडल संख्या: | B2B1290 |
भुगतान & नौवहन नियमों:
| न्यूनतम आदेश मात्रा: | 1पीसी |
|---|---|
| मूल्य: | Negotiate |
| पैकेजिंग विवरण: | उपहार बॉक्स |
| प्रसव के समय: | नमूना: भुगतान के बाद लगभग 3-5 कार्य दिवस |
| भुगतान शर्तें: | टी/टी, वेस्टर्न यूनियन, पेपैल, क्रेडिट कार्ड |
| आपूर्ति की क्षमता: | 10000 पीसी/माह |
|
विस्तार जानकारी |
|||
| बैटरी प्रकार अनुकूलता: | लेड-एसिड, एजीएम, जेल, लिथियम | प्रकार: | एमपीपीटी |
|---|---|---|---|
| आउटपुट वोल्टेज: | डीसी 12 वी / 24 वी | बिजली उत्पादन: | 500W |
| परिचालन तापमान: | -10°C से 50°C | वोल्टेज: | 12-50v |
| पीवीमैक्स: | 685W | डीसी अधिकतम शक्ति: | 390W |
| समारोह: | एपीपी नियंत्रण | फ़्रिज: | 20ए |
| अभियोक्ता: | सौर बैटरी चार्जर | सॉकेट मानक: | ईयू/एयू/यूके/यूएस |
| परिचालन तापमान: | -20-50 ℃ | प्रमाणपत्र: | सीई, आरओएचएस |
| वाल्ट: | 12वी | ||
| प्रमुखता देना: | 12V LiFePO4 battery charger,RV DC-DC charging controller,lithium-ion battery charging controller |
||
उत्पाद विवरण
INSTALLATION ATTENTION
• Do not expose the DC/DC charge tr o rain or snow.
• Do not use the DC/DC charger if it has received a sharp blow, been dropped,
has cracks or openings in the case, or is damaged in any other way.
• Do not install the charger near a heat source.
• This charger should not be installed in an airtight or poorly ventilated area.
• Do not attempt to open the DC/DC charger. There are no user serviceable parts
except for user replaceable fuses.
• Do not use the DC/DC charger with damaged cables.
• It is strictly forbidden to disassemble the charger and/or modify the housing in
any way.
CONNECTIONS ATTENTION
• It is important to choose the correct battery type, a wrong choice can cause irreversible
damage, The LITHIUM charging cycle is only compatible with LiFePo4 batteries with
integrated BMS (Battery Management System).
Maintenance
• If necessary, the fuses must be replaced by identical products.
• This charger cannot be disassembled and the electronic board is inaccessible.
• Therefore, with the exception of the fuses, all on-site maintenance is prohibited.
• Disconnect the DC power supply before servicing, cleaning or working on
circuits connected to the DC/DC booster.
• Once disconnected, isolate the battery connection terminals.
• It is important to ensure that the area around the battery is well ventilated.
• It is important to ensure that the battery voltage matches the output voltage
• Always use ungrounded batteries. If necessary, the battery grounding connection
should be made last.
To prevent overheating, make sure the connections are properly tightened
इस उत्पाद के बारे में अधिक जानकारी जानना चाहते हैं